Benefits and Precautions of Updating Software for Iomega StorCenter ix2-200 NAS Device

How to Download Software for Iomega StorCenter ix2-200 NAS Device

If you have an Iomega StorCenter ix2-200 network-attached storage (NAS) device, you might want to keep it updated with the latest software to ensure its optimal performance, stability, and security. In this article, we will show you how to download and install the software for your Iomega StorCenter ix2-200 NAS device in a few easy steps.

Iomega storcenter ix2 200 download software

Introduction

An Iomega StorCenter ix2-200 NAS device is a small but powerful storage solution that allows you to store, share, and access your files across your home or office network. It can also stream media, backup your data, and run various applications. You can manage your NAS device using a web-based interface that you can access from any browser.

Updating the software or firmware on your NAS device is important because it can fix bugs, improve features, and enhance security. For example, the latest firmware version for Iomega StorCenter ix2-200 NAS device is 2.1.48.30125, which updates OpenSSL to address several security vulnerabilities.

Before you download and install the software for your NAS device, you need to meet some requirements and follow some precautions. You need to have a computer that is connected to the same network as your NAS device, and a web browser that supports JavaScript. You also need to have administrator rights on your NAS device. You should not interrupt or power off your NAS device during the installation process, as this may cause damage or data loss. You should also backup your data before updating the firmware, as this may erase some settings or preferences.

How to Download Software for Iomega StorCenter ix2-200 NAS Device

Step 1: Check the current firmware version on your NAS device

The first step is to check the current firmware version on your NAS device, so you can compare it with the latest version available on Lenovo website. Lenovo is the owner of Iomega brand since 2014, so you can find all the support and downloads for your Iomega products on Lenovo website.

To check the current firmware version on your NAS device, you need to access its web interface using a web browser. To do this, open a web browser and type in the IP address of your NAS device in the address bar. If you don't know the IP address of your NAS device, you can use a tool like ping or arp to find it. Alternatively, you can use a discovery tool like LenovoEMC Storage Manager or Iomega Storage Manager to find and access your NAS device.

Once you access the web interface of your NAS device, you will see a dashboard that shows various information about your NAS device, such as its name, status, capacity, users, shares, etc. To find the firmware version, click on Settings in the top right corner of the dashboard. Then click on System in the left sidebar. You will see a section called System Information, where you will find the Firmware Version. Note down this number for later reference.

Step 2: Download the latest firmware file from Lenovo website

The next step is to download the latest firmware file from Lenovo website that matches your NAS device model and region. To do this, open a new tab in your web browser and go to https://datacentersupport.lenovo.com/us/en/products/storage/nas-storage/ix2-ng. This is the product page for Iomega StorCenter ix2-ng (Iomega), which is also compatible with Iomega StorCenter ix2-200.

On this page, click on Drivers & Software in the top menu bar. Then click on Firmware Update in the left sidebar. You will see a list of available firmware files for different regions. Choose the one that matches your region and click on Download. For example, if you are in North America, choose IOMEGALP-NAS-4TB_4_1_406_34959.bin. Save this file to a location that you can easily access later.

Step 3: Upload and install the firmware file on your NAS device

The final step is to upload and install the firmware file on your NAS device using its web interface. To do this, go back to the web interface of your NAS device and click on Settings in the top right corner of the dashboard. Then click on System in the left sidebar. You will see a section called Firmware Update, where you will find a button called Browse.... Click on this button and locate the firmware file that you downloaded earlier. Select this file and click on Open. Then click on Upload Firmware File. This will start uploading